EnglishReefer
31-05-03, 23:51
Well I'm bored sat here so I'll give you some spec's of my new tank to be. Setup should be in the next couple of weeks.
The majority of equipment is from my 4x2x2 I've just broke down (down sizing... lovely... not).
Tank
28"Lx28"Hx24"W 10mm glass.
Sump
25-30 gallon plastic tub, OR3500 as return pump.
Possibly an additional tank/tub as a refuge/extra capacity.
Lighting
1x400w blv 10k, bulb mounted in homemade reflector.
Probably with a pair of T5 blues to suppliment.
Circulation
1xTunze stream 6000 (probably with tunze controller for speed variation).
2xEheim 1060, setup as closed loop on system 2k wavemaker.
Other equipment
Deltec 850 skimmer.
Homemade kalkwasser stirer.
Deltec calcium reactor, with Pinpoint ph probe.
Teco ra240 chiller driven by OR3500.
System 2k heater module (yes I know! due to be replaced).
Tank will be mostly SPS and clams with a couple of LPS and softs.
The majority of equipment is from my 4x2x2 I've just broke down (down sizing... lovely... not).
Tank
28"Lx28"Hx24"W 10mm glass.
Sump
25-30 gallon plastic tub, OR3500 as return pump.
Possibly an additional tank/tub as a refuge/extra capacity.
Lighting
1x400w blv 10k, bulb mounted in homemade reflector.
Probably with a pair of T5 blues to suppliment.
Circulation
1xTunze stream 6000 (probably with tunze controller for speed variation).
2xEheim 1060, setup as closed loop on system 2k wavemaker.
Other equipment
Deltec 850 skimmer.
Homemade kalkwasser stirer.
Deltec calcium reactor, with Pinpoint ph probe.
Teco ra240 chiller driven by OR3500.
System 2k heater module (yes I know! due to be replaced).
Tank will be mostly SPS and clams with a couple of LPS and softs.