Aqua Digital MV controller

[pjos11]

Ordered one of these and it was delivered within two days.:) Took me awhile to get the hang of it but got there in the end.

Thanks Mr Reefdreams

[stevew@reefdreams]

Glad you received it ok, it does take a little longer for our couriers to cross that bit of water so not up to our usual next day service.

As you will have seen we are in the process of writing new instructions for all our products as those supplied by manufacturers are limited for the modern reefer, I'll try and do the ORP controller next.

Steve

[pjos11]

Steve I have been running the system for two days and the reading in the tank is 114Mv it has not got any higher in this time. I did notice that something seems to rattling about from inside the Ozone sterilizer. Maybe it could be faulty?

Paul

[pjos11]

Steve thanks for the Probe it arrived today. I am now getting readings around 260MV. What do you want me to do with the first probe?

The PH controller arrived also and is working well:D Dont know why it took me so long to buy one. I am using it to control the amount of CO2 in my Calcuim Reactor can you recommend the setting to keep the PH at? I use Deltec media.


Thanks again for your great service.


Paul

[stevew@reefdreams]

:)

I would start at 6.5pH and then test the effluent, there are some threads around on UR that explain how to test the effluent by filtering it through a coffee filter paper first. With some media you may need to drop the pH down to 6.2 to get the media to dissolve sufficiently.

Steve

[stevew@reefdreams]

I forgot to say, just bin the faulty the old probe.

[MisterB]

Can anyone give me any help in using the

Aqua Digital Ozone Sterilizer 300mg/hr and the MV Controller

I have installed them in my tank but not sure what to do next

[MisterB]

My controller is giving readings of 109 the last i looked