socket numbers

[matt1001]

hi i have a ghl with one 4 plug bar and one 6 plug bar

the problem i have is i cant remember which bar has which numbers

i think the 4 plug becomes 5-8, and the 6 plug becomes 9- 14

can some one confirm this pls


also which sockets are suitable for mh use is it 1+2 on the 6 plug?
and are these the two nearest the red leds or the other end?


thanks in advance

Matt

[stevew@reefdreams]

Hi Matt,

Analogue plugbars always adopt the socket numbers of the port they are plugged into. i.e. S1/S4 or S5/S8

If you have both a digital and analogue plugbar then the digital one must be plugged into S1/S4(which is digital enabled) and the analogue into S5/S8 this means that the analogue plugbar will be sockets 5-8. You will need to program the digital plugbar to start at socket 9 onwards to avoid a conflict.

Let me know if you need any further help, you can always call and I will talk you through it.

Steve

[stevew@reefdreams]

I forgot your other question:o

Sockets 1,2,5,6 are surge protected and suitable for lighting applications, that's the two sockets at either end.

Steve

[matt1001]

thanks very much for that steve,

am i still able to add another 6plug to this set up if i need to?