GHL Profilux II light plug bar

[wave ace]

Hi I'm thinking of getting a GHL Profilux II light plug bar to control my lighting is there anything else that I need to control dimmable T5's eg adaptor, leads

[stevew@reefdreams]

That really depends on what sort of lights you have. The Light bar has 2 x 1-10v ports, so you will need cables to connect to the light unit, if they are just dimmable ballasts then you will also need a driver blank EVG-AP-2F to turn the lights off when the dimming reaches 0%.

Probably best to post which lights/ballasts you are using and then we can advise.

Steve

[wave ace]

the light ballast is a Osram Quicktronic intelligent QTi 2x28/54 DIM

[stevew@reefdreams]

You will need a PL-0058 / EVG-AP-2F driver blank and then connect it all up as described in this document (English is further down the document).

http://www.aquariumcomputer.com/Download/Manual_EVG-AP2_V400.pdf

Steve

[wave ace]

Thanks Steve

what is the cost of the driver ?

[stevew@reefdreams]

They are around £20.. Available from all GHL stockists.
http://www.ghl-profilux.co.uk/acatalog/Lighting_Accessories.html

Steve