Antisync Mode

[fishmaduds]

I have 2 MP40w's

I now have managed to get my slave pump into antisync mode......:dance:

my question is..should it stay permant orange..or should it flash when the other pump is not pumping?
..

[fishmaduds]

anyone???

[instantsquid]

What do you mean by "not pumping"? Do you mean "switched off"?

[Ridgeway]

I thought that the master was the colour of the pattern you've set and that the slave was always white in sync or anti-sync

[fishmaduds]

What do you mean by "not pumping"? Do you mean "switched off"?

what I mean is when the master is pulsing..the antisync one is not and vise versa.......at the moment...the master flashes when it pulses.however the antisync one just stays permant orange even when its pulsing..so my question is

does the antisync slave always stay permant orange..ie:....it does not flash when it pulses?

[Ridgeway]

Isn't the standard sync mode anti-sync ie this is what you get when you first pair up 2 devices ? It's what I've done and I'm sure that mine are in anti-sync. In that case my master is as the pattern (reef crest = yellow) and the slave white as the instructions say.

Does this help ?

[instantsquid]

When you first pair them up, white is "sync" mode. You have to set the slave into "anti-sync" mode which is orange. Mine doesn't flash orange - it stays on all the time.

Manual here: http://ecotechmarine.com/wp-content/uploads/2009/02/mp40w_manual_11.pdf

[JohnQdiver]

When you first pair them up, white is "sync" mode. You have to set the slave into "anti-sync" mode which is orange. Mine doesn't flash orange - it stays on all the time.

Manual here: http://ecotechmarine.com/wp-content/uploads/2009/02/mp40w_manual_11.pdf

Ditto

Orange on permanently in antisync mode.

[fishmaduds]

thanks guys.....so that answers my question, it should stay orange all the time..........many thanks to all those who have responded to my questions........owe you all a cold beer!