stevew@reefdreams
25-08-09, 21:35
http://www.reefdreams.co.uk/Images/PIII.jpg
(Profilux III eX Pictured)
The processor has been significantly updated, allowing for enormous expansion and new products, here is a comparison between the current Profilux and the new PIII.
PII / P III:
ROM 128 kB / 1 MB
RAM 8k / >1 MB (jetzt FRAM + DRAM)
Clock 24 MHz / 100 MHz
Bus 16 Bit / 32 Bit
The PIII will feature a built in webserver, the PAB (Profilux Aquatic Bus) will allow you to connect further card expansion boxes removing the current limitations on expansion cards and Plug bars
This display will have the same dimensions as the ProfiLux II display and will also be blue/white. But now it is a graphical display, and can display icons etc.
Profilux III (including temperature probe) £427.99 (http://www.ghl-profilux.co.uk/acatalog/GHL-Profilux-III-Aquatic-Computer---Controller.html)
This controller has the following ports available as standard:
1 x Water temperature sensor port
1 x Water level sensor port (can control 2 level sensors with the use of a splitter)
1 x pH sensor port
1 x L1/L2 - 1-10v control port - for control of up to two (via splitter) LED simulation lights or channels for dimmable lighting or Tunze controllable stream pumps.
1 x L3/L4 - 1-10v control port - for control of up to two (via splitter) LED simulation lights or channels for dimmable lighting or Tunze controllable stream pumps.
1 x S1/S4 - Socket outlet port - to connect either 1 x 4 socket Analogue power bar or up to 4x 6 socket digital power bars or 2x 4 Pump dosing pumps, or any combination giving a total of 24 individual sockets/dosing pumps
1 x S5/S8 - Socket outlet port - to connect 1 x 4 socket Analogue power bar.
1 x RS232 - Pc connection port.
2 x Spare Expansion card slots.
1 x PAB (Profilux aquatic Bus) expansion port
1 x LAN (ethernet) connection Port
1 x USB connection port
Upgraded Graphic Display
The Profilux III can be upgraded to a Profilux III eX at any time by purchasing the standard eX upgrade kit HERE. (http://www.ghl-profilux.co.uk/acatalog/eXtended-Upgrade-Kit-For-The-Profilux-Plus-II-Controller.html)
Profilux III eX (including temperature probe) £564.49 (http://www.ghl-profilux.co.uk/acatalog/GHL-Profilux-III-eX-Aquatic-Computer---Controller.html)
1 x Water temperature sensor port
2 x Water Level sensor port (can control 3 level sensors or 2 level sensors and a leakage detector with the use of a splitter)
1 x pH sensor port
1 x Saltwater conductivity sensor port
1 x Redox sensor port
1 x L1/L2 - 1-10v control port - for control of up to two (via splitter) LED simulation lights or channels for dimmable lighting or Tunze contollable stream pumps.
1 x L3/L4 - 1-10v control port - for control of up to two (via splitter) LED simulation lights or channels for dimmable lighting or Tunze contollable stream pumps.
1 x L5/L6 - 1-10v control port - for control of up to two (via splitter) LED simulation lights or channels for dimmable lighting or Tunze contollable stream pumps.
1 x S1/S4 - Socket outlet port - to connect either 1 x 4 socket Analogue power bar or up to 4x 6 socket digital power bars or 2x 4 Pump dosing pumps, or any
combination giving a total of 24 individual sockets/dosing pumps
1 x S5/S8 - Socket outlet port - to connect 1 x 4 socket Analogue power bar.
1 x RS232 - Pc connection port.
2 x Spare Expansion card slots.
1 x PAB (Profilux aquatic Bus) expansion port
1 x LAN (ethernet) connection Port
1 x USB connection port
Upgraded Graphic Display
The PAB (Profilux Aquatic Bus) system will allow further expansion boxes and PAB power bars to be connected to the system removing the limitations of the Profilux II
and the S1/S4 port described above.
For more information on the PAB powerbar please click HERE. (http://www.ultimatereef.net/forums/showthread.php?t=327721)
For more information on the PAB Expansion boxes please click HERE. (http://www.ultimatereef.net/forums/showthread.php?t=327722)
The Profilux III and III eX will be available from October 2009, pre-order details to follow.
(Profilux III eX Pictured)
The processor has been significantly updated, allowing for enormous expansion and new products, here is a comparison between the current Profilux and the new PIII.
PII / P III:
ROM 128 kB / 1 MB
RAM 8k / >1 MB (jetzt FRAM + DRAM)
Clock 24 MHz / 100 MHz
Bus 16 Bit / 32 Bit
The PIII will feature a built in webserver, the PAB (Profilux Aquatic Bus) will allow you to connect further card expansion boxes removing the current limitations on expansion cards and Plug bars
This display will have the same dimensions as the ProfiLux II display and will also be blue/white. But now it is a graphical display, and can display icons etc.
Profilux III (including temperature probe) £427.99 (http://www.ghl-profilux.co.uk/acatalog/GHL-Profilux-III-Aquatic-Computer---Controller.html)
This controller has the following ports available as standard:
1 x Water temperature sensor port
1 x Water level sensor port (can control 2 level sensors with the use of a splitter)
1 x pH sensor port
1 x L1/L2 - 1-10v control port - for control of up to two (via splitter) LED simulation lights or channels for dimmable lighting or Tunze controllable stream pumps.
1 x L3/L4 - 1-10v control port - for control of up to two (via splitter) LED simulation lights or channels for dimmable lighting or Tunze controllable stream pumps.
1 x S1/S4 - Socket outlet port - to connect either 1 x 4 socket Analogue power bar or up to 4x 6 socket digital power bars or 2x 4 Pump dosing pumps, or any combination giving a total of 24 individual sockets/dosing pumps
1 x S5/S8 - Socket outlet port - to connect 1 x 4 socket Analogue power bar.
1 x RS232 - Pc connection port.
2 x Spare Expansion card slots.
1 x PAB (Profilux aquatic Bus) expansion port
1 x LAN (ethernet) connection Port
1 x USB connection port
Upgraded Graphic Display
The Profilux III can be upgraded to a Profilux III eX at any time by purchasing the standard eX upgrade kit HERE. (http://www.ghl-profilux.co.uk/acatalog/eXtended-Upgrade-Kit-For-The-Profilux-Plus-II-Controller.html)
Profilux III eX (including temperature probe) £564.49 (http://www.ghl-profilux.co.uk/acatalog/GHL-Profilux-III-eX-Aquatic-Computer---Controller.html)
1 x Water temperature sensor port
2 x Water Level sensor port (can control 3 level sensors or 2 level sensors and a leakage detector with the use of a splitter)
1 x pH sensor port
1 x Saltwater conductivity sensor port
1 x Redox sensor port
1 x L1/L2 - 1-10v control port - for control of up to two (via splitter) LED simulation lights or channels for dimmable lighting or Tunze contollable stream pumps.
1 x L3/L4 - 1-10v control port - for control of up to two (via splitter) LED simulation lights or channels for dimmable lighting or Tunze contollable stream pumps.
1 x L5/L6 - 1-10v control port - for control of up to two (via splitter) LED simulation lights or channels for dimmable lighting or Tunze contollable stream pumps.
1 x S1/S4 - Socket outlet port - to connect either 1 x 4 socket Analogue power bar or up to 4x 6 socket digital power bars or 2x 4 Pump dosing pumps, or any
combination giving a total of 24 individual sockets/dosing pumps
1 x S5/S8 - Socket outlet port - to connect 1 x 4 socket Analogue power bar.
1 x RS232 - Pc connection port.
2 x Spare Expansion card slots.
1 x PAB (Profilux aquatic Bus) expansion port
1 x LAN (ethernet) connection Port
1 x USB connection port
Upgraded Graphic Display
The PAB (Profilux Aquatic Bus) system will allow further expansion boxes and PAB power bars to be connected to the system removing the limitations of the Profilux II
and the S1/S4 port described above.
For more information on the PAB powerbar please click HERE. (http://www.ultimatereef.net/forums/showthread.php?t=327721)
For more information on the PAB Expansion boxes please click HERE. (http://www.ultimatereef.net/forums/showthread.php?t=327722)
The Profilux III and III eX will be available from October 2009, pre-order details to follow.